waste plastic film squeezing and dewatering and pellete machine
It is a full automatic Squeezing & Pelletizing Machine to the film and woven bags, with the screw squeezing and electrical heating, make the materials have high degree of drying and full plasticizing, low power consumption, high output. The final moisture is only 3-5%. The capacity would be customized according to the requests of clients.
Working principle and object
This machine adopts the principle of extrusion dehydration, which is to clean the plastic film (plastic film, plastic film, PP woven bag, snake skin bag, space bag, ton bag, thin plastic sheet waste plastic) after cleaning. A device in which the water in the plastic is squeezed clean. Special structure screw device, special reducer, fully automatic extrusion and dehydration for plastic film, plastic film, PP woven bag, snakeskin bag, space bag, ton bag, thin plastic sheet waste plastic device. Squeeze and dry dehydration is fast and effective. It is convenient for the output of subsequent granulation production to increase. The dewatering and dewatering effect reaches 95-9.5% or more (according to the customer's subsequent production requirements).
This plastic squeezer is used for squeezing and re-pelletizing PP/PE film, woven bag, ton bags, nylon etc. it's equipped with advanced screw extrusion system, squeezing efficiency could reach 95%. Also can work on the accordance with washing and pelletizing line with stable capacity and whole process automation.
1. LDPE waste film recycling and washing line
2. PE agriculture using films crushing and washing line
3. Waste PE film recycling line
4. Ethylene ground film washing, drying and regranulating line
5. Waste film recycling and washing line
6. PP woven bag recycling and washing line
1. The unique principle of squeeze drying and dehydration solves the problem of difficult dehydration of traditional film plastics;
2, the effect of squeezing is good: more than 95% guaranteed;
3, advanced technology, low energy consumption, low noise, simple operation, safety, etc.
4, mechanical extrusion dewatering, compared with the original hot air drying, greatly save space and energy;
5, the total installed power: 140kw, the actual power consumption is about 70%.
6. Cooling water is about 1 ton per hour.
The raw material is waste plastic film /woven bags