ZhangJiaGang Antron Machinery,Co.,Ltd

PP PE waste film woven bags recycling production line plastic pellets granules making machine

  • Category:PP PE film granule making machine
  • Views:451
  • capacity:200-800kg/h
  • screw speed:0-115rmp
  • cooling way:by water
  • capacity:200-800kg/h
  • Product Manual:1.Materials:PP, PE, HDPE, LDPE, LLDPE,CPP, BOPP, EPS etc,Shape:Film, Bag, Woven bag, Raffia,Bubble film, Foam, nonwoven fabric, Filament,sheet,chips
    2.Pelletizing Way: Pull Strap(Like Noodles)
BASIC INFO Inquiry

PP PE waste film woven bags recycling production line plastic pellets granules making machine

Product description:

Waste plastic (domestic waste plastic film) cleaning, granulating and recycling production line
1. The entire production line has a high degree of automation. It is a fully automatic assembly line. As long as someone adds waste plastic in the front and someone connects with the finished pellet product, the direct conversion from the used plastic to the finished pellet product is achieved.
2. On the basis of German equipment drawings, the entire production line is continuously improved, the design is reasonable, the appearance is beautiful, the durability is durable, and the parts in contact with the materials are made of stainless steel;
3. The quality of the particles is high, no bubbles, full and round;
4. The shape of the particles is beautiful, the shape is cylindrical, and the size and thickness can be adjusted;
5. The granulating line forced feeding device, main machine and pelletizer are controlled by inverter;
6. The granulating line screw and barrel are made of 38CrMoAl, and the surface is nitrided and hardened, with a long service life.
7. Granulating line gear box adopts hard-toothed surface oil cooling gear box, its weight is reduced by half compared with soft-toothed gear box, wear resistance, 3 ~ 4 times longer service life, and 8 ~ 10 times higher load capacity;
8. After the material is discharged, the granulation line is directly cut into pellets by the water ring, dewatered by a dewatering machine, and the appropriate granules are selected by a vibrating screen and sent to a storage bin by a fan.
9. There is a drainage port and a vacuum pump on the granulation line barrel, which discharges and exhausts the air to ensure the quality of the particles.

1. Feeding: belt feeding, frequency conversion control, and when the current of the compactor reaches the set value, the belt will automatically stop. When the current drops, the belt will start automatically. Linked, when the metal detector alarms, the belt will stop, and the belt will start after the alarm is cleared. If customers find metal detection too expensive, we can also make strong magnetic belt rollers to remove iron. Of course the price will increase.

2. In terms of feeding, the compactor combines the function of the pelletizer, and in order to increase the speed and effect of the pellet, we have made changes to the cutter plate and fixed knife of the compactor. The deflector is improved at the screw inlet.

3. In order to control the compactor, we have also made our own design. The material is sheared, rotated and rubbed in the pot, the temperature will continue to rise, and it will shrink into agglomerates. When it enters the screw, it is already semi-plasticized. The heat energy required in the screw will be reduced, the heating time will be shorter, more material will be fed in, the material will be faster, and the output will naturally increase (the more material is fed in, the material is not delivered in time, and the screw will be stuck) This doesn't work. There is less material to feed in, and there is no output, neither). The temperature when the material enters the screw is also very important. The higher the temperature, the higher the yield naturally. However, if it is too high, the material will stick to the block in the pot body, as the saying goes, the paste pot. Once the material is formed into a whole piece, it can't enter the screw, so it needs to be shut down for cleaning. Therefore, controlling the temperature of the material in the compactor pot is an important and complicated matter. This is also the advantage of our bank and others.

Production line configuration sheet:
1 feeding belt 1
2 metal detector 1
3 compact machine pot 1
4 extruder 1
5 vacuum dehumidification system 1
6 double station plate screen changer with pressure sensor 1 set
7 hydraulic station 1
8 water ring pelletizing die 1
9 vertical centrifugal dehydrator 1
10 Shaker
11 air delivery system 1
12 silos 1
13 electrical control cabinet 1

The layout of this machine
Plastic Granules Making Machine for LDPE HDPE Film Shopping Bags

1.Belt conveyor

2.Compactor

3.Single screw extruder machine

4.Hydraulic screen exhanger

5.Single screw extruder machine

6.Hydraulic screen exhanger

7.Vertical Water-ring die face cutting system

8.Water slot

9.Centrifugal dryer

10.Vibration


Main Parameter Data Sheet:

Model

Screw diameter(mm)

L/D

Capacity(kg/h)

Main motor power(kw)

compactor power(kw)

Line length(m)

PP/PE-85

85

25-33

200-250

75

55

10

PP/PE-100

100

25-33

250-300

90

55

12

PP/PE-120

120

25-33

350-400

110

90

15

PP/PE-130

140

25-33

400-500

132

110

18

PP/PE-160

160

25-33

600-800

160

110

20

PP/PE-180

180

25-33

600-800

250

132

26







PREVIOUS:plastic PP PE film pellets making recycling machine plastic recycling
NEXT:Waste Die Face Cutting PP HDPE ABS PVC PE Plastic Film Pellets Making Machine Price

Deutsch Espanol Francais Italiano Portugues Japanese Korean Arabic Russian
X