ZhangJiaGang Antron Machinery,Co.,Ltd

Introduction to engineering plastic granulator


Introduction to engineering plastic granulator:

Engineering thermoplastics are a class of functionalities with good heat resistance, cold resistance, mechanical properties, dimensional stability, electrical insulation, chemical resistance, weather resistance, conductivity, UV radiation resistance and adhesion. Thermoplastic. These properties of engineering thermoplastics enable them to be used in harsh environments, especially in the electronics, electrical, automotive, and other industries, as well as in the pharmaceutical, optical, sports, and construction industries.

The wide range of applications of engineering thermoplastics has maintained a good momentum of development after entering the market. As the consumption of engineering thermoplastics increases, so does its waste. Therefore, the recycling of engineering plastics has also become a popular item. Engineering plastics such as ABS, PC, polyamide, PBT and POM, as well as their blends/alloys (eg PC/PBT, PC/ABS), PP composites and alloys can be recycled. Typical recycled engineering plastic products include automotive bumpers, car dashboards, car fenders, computer casings, electrical enclosures, junction boxes, copier housings, compact discs, nylon fiber fragments, PC water bottles, etc.

The plastic granulator is mainly used for the modification of recycled engineering plastics. The following describes the modification of the six types of engineering plastics one by one:

1.PC engineering plastic modified granulation

Recycled PC is low viscosity PC (disc grade) according to fluidity, medium viscosity PC (injection grade), high viscosity grade (sheet grade, sheet grade)

Use of regenerative modified PC: automotive industry: car treasure chest, instrument panel, radiator grille, decorative panel, electrical enclosure, mobile phone casing, sporting goods, socket plug, switch panel, LED bracket, meter box casing, PC sheet and Plate

The types of recycled PC modification can be divided into the following six types:

A. Recycle PC pumping, choose the right lubricant, such as PETS-SP, silicone lubricant, etc. for transparent PC. EBS is not recommended because it will cause PC degradation.

B. Regeneration PC toughening, commonly used toughening system is mainly nuclear-shell structure polymer, the main toughening agent is MBS, KT-15, DuPont 1125AC, ACR/TPS.TPU, etc.

C. Recycled PC flame retardant, commonly used flame retardant systems are: bromine flame retardant system, phosphorus flame retardant system silicon flame retardant system, bromine nitrogen flame retardant system, etc.

D. PC/ABS alloy, commonly used compatibilizers such as ABS, AS, PS, etc. grafted maleic anhydride, etc.

E. PA/PBT alloy, common compatible toughening agent can be used with reference to PC and PBT, such as methacrylic acid glycerol glycol graft

F. PC/PE alloy, compatibilizer commonly used in PE and maleic anhydride branches, etc.

Engineering plastic PC modification requires baking before processing. The drying requirements are generally 110-120 ° C for 3-5 hours. For alloys, the temperature of the baking can be appropriately reduced depending on the alloy. The processing temperature is generally 240-290 ° C, for the alloy is generally 220-260 ° C. For PCs that are prone to stress, it is best to control the mold temperature at 60-120 ° C.

Through the twin-screw combination of the engineering plastic granulator, it can be adjusted according to the different materials to be optimized, and the particles can be optimized.

Other modifications such as PBT engineering plastic modification, recycled PET engineering plastic modification, modified PA regeneration modification of PPA will be updated in our company news, you can also inquire!

PREVIOUS:The non-woven/nylon fiber recycling granulation production line
NEXT:Snake bag recycling granulator, woven bag recycling machine, ton bag recycling granulator

Deutsch Espanol Francais Italiano Portugues Japanese Korean Arabic Russian
X